EB2-PA series Joystick Switch

Suitable for industrial control circuits with AC 50Hz to 60Hz, rated working voltage up to 380V, and DC working voltage 220V, used for controlling magnetic starters, contactors, relays, and other electrical circuits
1. The installation holes for all buttons in this series are Φ 22mm
2. The metal button adopts an anti tampering operating head. The button cannot be removed from the front.
3. All metal contacts have a dual function of switching circuits and self-cleaning, which can still ensure the reliability of the contact in low voltage and low current {5v, 5mv} use.
4. Normally open and normally closed contacts are independent of each other, and can be combined as needed for easy replacement.
5. Widely used in industrial control circuits with AC 50Hz, rated working voltage 0-380V, and DC working voltage 0-220V, as a control for magnetic starters, contactors, relays, and other electrical circuits.
6. Standard usage environment:
Surrounding temperature: -25~+55 (without freezing)
Operating humidity: 45-85% RH (no condensation)
Contact resistance: ≤ 50m Ω
Insulation resistance: ≥ 100 Ω
High voltage withstand: 3000 V, AC 50 Hz
Vibration: 50 Hz, amplitude approximately 1mm
Impact resistance: greater than 10m/s2 (approximately 10G)
Lifetime machinery: (1 million); Electrical: (More than 30000 times)
Pollution level: Level 3
Protection level: IP40
Suitable for circuit control systems with AC 50Hz or 60Hz, voltage up to 380V, and DC working voltage up to 220V. Used for controlling electromagnetic starters, contactors, relays, and other electrical circuits. The button with indicator light is also suitable for occasions with light signal indication. This product meets the GB 14048.5 standard.
Normal working conditions:
1. The ambient air temperature is -5 ℃ to+40 ℃, and its average value within 24 ℃ hours does not exceed+35 ℃.
2. Altitude: The altitude of the installation site shall not exceed 2000m.
3. Atmospheric conditions: When the high temperature is+40 ℃, the relative humidity of the air does not exceed 50%. Higher relative humidity can be allowed at lower temperatures, such as reaching 90% at+20 ℃. Special measures should be taken for occasional condensation caused by temperature changes.
4. Pollution level: Level 3
5. Installation category: Class II